HPE6-A85 Free Learning Cram, High HPE6-A85 Quality

Our HPE6-A85 test material is known for their good performance and massive learning resources. In general, users pay great attention to product performance. After a long period of development, our HPE6-A85 research materials have a lot of innovation. We can guarantee that users will be able to operate flexibly, and we also take the feedback of users who use the Aruba Campus Access Associate Exam exam dumps seriously. Once our researchers find that these recommendations are possible to implement, we will try to refine the details of the HPE6-A85 Quiz guide. Our HPE6-A85 quiz guide has been seeking innovation and continuous development.

HP HPE6-A85 (Aruba Campus Access Associate) Certification Exam is a certification program that provides advanced-level knowledge and skills in the field of Aruba Campus Access networking. Aruba Campus Access Associate Exam certification will enable professionals to plan, deploy, and manage secure wireless networks in complex enterprise environments.

HP HPE6-A85 exam is a certification exam that focuses on the knowledge and skills required for Aruba Campus Access Associate. HPE6-A85 exam is designed to test the candidate's understanding of Aruba networking technologies and concepts, including wireless LANs, mobility, security, and wired infrastructure.

The HP HPE6-A85 Exam covers various topics, including Aruba WLAN fundamentals, Aruba access point deployment, Aruba Mobility Master and Mobility Controller, and Aruba ClearPass. HPE6-A85 exam also assesses the candidate's ability to troubleshoot common issues that may arise in an Aruba WLAN environment.

>> HPE6-A85 Free Learning Cram <<

Efficient HPE6-A85 Free Learning Cram to Obtain HP Certification

Someone asked, where is success? Then I tell you, success is in ValidTorrent. Select ValidTorrent is to choose success. ValidTorrent's HP HPE6-A85 exam training materials can help all candidates to pass the IT certification exam. Through the use of a lot of candidates, ValidTorrent's HP HPE6-A85 Exam Training materials is get a great response aroud candidates, and to establish a good reputation. This is turn out that select ValidTorrent's HP HPE6-A85 exam training materials is to choose success.

HP Aruba Campus Access Associate Exam Sample Questions (Q95-Q100):

NEW QUESTION # 95
You need to drop excessive broadcast traffic on ingress to an ArubaOS-CX switch.
What is the best technology to use for this task?

A. Rate limiting
B. Strict queuing
C. QoS shaping
D. DWRR queuing

Answer: A

Explanation:
The best technology to use for dropping excessive broadcast traffic on ingress to an ArubaOS-CX switch is rate limiting. Rate limiting is a feature that allows network administrators to control the amount of traffic that enters or leaves a port or a VLAN on a switch by setting bandwidth thresholds or limits. Rate limiting can be used to prevent network congestion, improve network performance, enforce service level agreements(SLAs), or mitigate denial-of-service (DoS) attacks. Rate limiting can be applied to broadcast traffic on ingress to an ArubaOS-CX switch by using the storm-control command in interface configuration mode. This command allows network administrators to specify the percentage of bandwidth or packets per second that can be used by broadcast traffic on an ingress port. If the broadcast traffic exceeds the specified threshold, the switch will drop the excess packets.
The other options are not technologies for dropping excessive broadcast traffic on ingress because:
- DWRR queuing: DWRR stands for Deficit Weighted Round Robin, which is a queuing algorithm that assigns different weights or priorities to different traffic classes or queues on an egress port. DWRR ensures that each queue gets its fair share of bandwidth based on its weight while avoiding starvation of lower priority queues. DWRR does not drop excessive broadcast traffic on ingress, but rather schedules outgoing traffic on egress.
- QoS shaping: QoS stands for Quality of Service, which is a set of techniques that manage network resources and provide different levels of service to different types of traffic based on their requirements.
QoS shaping is a technique that delays or buffers outgoing traffic on an egress port to match the available bandwidth or rate limit. QoS shaping does not drop excessive broadcast traffic on ingress, but rather smooths outgoing traffic on egress.
- Strict queuing: Strict queuing is another queuing algorithm that assigns different priorities to different traffic classes or queues on an egress port. Strict queuing ensures that higher priority queues are always served before lower priority queues regardless of their bandwidth requirements or weights. Strict queuing does not drop excessive broadcast traffic on ingress, but rather schedules outgoing traffic on egress.
References:
https://en.wikipedia.org/wiki/Rate_limiting
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/NOSCG/Content/cx-noscg/qos/storm- control.htm
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/NOSCG/Content/cx-noscg/qos/dwrr.htm
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/NOSCG/Content/cx-noscg/qos/shaping.htm
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/NOSCG/Content/cx-noscg/qos/strict.htm

NEW QUESTION # 96
Two independent ArubaOS-CX 6300 switches with Spanning Tree (STP) settings are interconnected with two cables between ports 1/1/1 and 1/1/2 All four ports have "no shutdown" and "no routing" commands How will STP forward or discard traffic on these ports?

A. The switch with the lower MAC address will forward on both ports, while the switch with the higher MAC address will discard on one port
B. The switch with the lower MAC address will discard on one port, while the switch with the higher MAC address will discard on one port
C. The switch with the lower MAC address will forward on both ports, while the switch with the higher MAC address will forward on both ports
D. The switch with the lower MAC address will discard on one port, while the switch with the higher MAC address will forward on both ports

Answer: B

Explanation:
The way that STP Spanning Tree Protocol. STP is a network protocol that ensures a loop-free topology for any bridged Ethernet local area network by preventing redundant paths between switches or bridges from creating loops that cause broadcast storms, multiple frame transmission, and MAC table instability. STP creates a logical tree structure that spans all of the switches in an extended network and blocks any redundant links that are not part of the tree from forwarding data packets3. will forward or discard traffic on these ports is as follows:
STP will elect a root bridge among the two switches based on their bridge IDs, which are composed of a priority value and a MAC address. The switch with the lower bridge ID will become the root bridge and will forward traffic on all its ports.
STP will assign a role and a state to each port on both switches based on their port IDs, which are composed of a priority value and a port number. The port with the lower port ID will become the designated port and will forward traffic, while the port with the higher port ID will become the alternate port and will discard traffic.
In this scenario, since both switches have two cables connected between ports 1/1/1 and 1/1/2, there will be two possible paths between them, creating a loop. To prevent this loop, STP will block one of these paths by discarding traffic on one of the ports on each switch.
Assuming that both switches have the same priority value (default is 32768), the switch with the lower MAC address will have the lower bridge ID and will become the root bridge. The root bridge will forward traffic on both ports 1/1/1 and 1/1/2.
Assuming that both ports have the same priority value (default is 128), port 1/1/1 will have a lower port ID than port 1/1/2 on both switches because it has a lower port number. Port 1/1/1 will become the designated port and will forward traffic, while port 1/1/2 will become the alternate port and will discard traffic.
Therefore, the switch with the lower MAC address will discard traffic on one port (port 1/1/2), while the switch with the higher MAC address will also discard traffic on one port (port 1/1/2).

NEW QUESTION # 97
You have been asked to troubleshoot failed connectivity between a local subnet in the HQ Office and a remote subnet in the Branch Office. PC1 is unable to ping PC2.
Use the provided topology and show command output to identify the reason for the failure:

A. On Branch Office L3-SW-2- The switch does not have a static route to the HQ Office Local Subnet.
B. On Branch Office - L3-SW-2- There is no Layer 3 SVI configured in the correct subnet.
C. On HQ Office L3-SW-1 - The switch does not have a static default route to the internet.
D. On HQ Office L3-SW-1 - There is no route to the Branch Office.

Answer: A

Explanation:
Using the provided topology and show command output, it can be determined that L3-SW-2 in the Branch Office does not have a route to reach the subnet where PC1 resides (192.168.1.0/24 in the HQ Office). L3- SW-1 in the HQ Office has a route to the Branch Office subnet (172.16.1.0/24), but without the reciprocal route on L3-SW-2, traffic from the Branch Office will not be able to reach the HQ Office subnet, hence PC1 cannot ping PC2.

NEW QUESTION # 98
What is indicated by a flashing amber global status indicator LED on an Aruba CX6200M?

A. Self-test is in progress.
B. The switch has a recoverable fault.
C. The switch is booting the firmware image.
D. The firmware image is corrupt.

Answer: D

Explanation:
A flashing amber global status indicator LED on an Aruba CX6200M switch typically indicates that the switch has encountered a fault, but it is recoverable. This LED behavior serves as an alert to the network administrator that an issue needs to be addressed, but it does not necessarily mean that the switch is inoperable.

NEW QUESTION # 99
Which commands are used to set a default route to 10.4.5.1 on an Aruba CX switch when ln-band management using an SVl is being used?

A. iP default-gateway 10.4.5.1
B. ip route 0 0 0.070 10.4 5.1 vrf mgmt
C. ip route 0.0 0 0/0 10.4.5.1
D. default-gateway 10.4.5.1

Answer: C

Explanation:
The command that is used to set a default route to 10.4.5.1 on an Aruba CX switch when in-band management using an SVI is being used is ip route 0.0 0 0/0 10.4.5.1. This command specifies the destination network address (0.0 0 0) and prefix length (/0) and the next-hop address (10.4.5.1) for reaching any network that is not directly connected to the switch. The default route applies to the default VRF Virtual Routing and Forwarding. VRF is a technology that allows multiple instances of a routing table to co-exist within the same router at the same time. VRFs are typically used to segment network traffic for security, privacy, or administrative purposes., which is used for in-band management traffic that goes through an SVI Switch Virtual Interface. SVI is a virtual interface on a switch that allows the switch to route packets between different VLANs on the same switch or different switches that are connected by a trunk link. An SVI is associated with a VLAN and has an IP address and subnet mask assigned to it12.
References:
1 https://www.arubanetworks.com/techdocs/AOS-CX/10_08/HTML/ip_route_4100i-6000-6100-
6200/Content/Ch
2 https://www.arubanetworks.com/techdocs/AOS-CX/10_08/HTML/ip_route_4100i-6000-6100-
6200/Content/Ch

NEW QUESTION # 100
......

HPE6-A85 exam preparation also provide you a deep insight knowledge about the HP HPE6-A85 exam topics. This knowledge will help you in HP HPE6-A85 exam success and career. The HP HPE6-A85 Exam Questions require some of your attention. You may use our HP HPE6-A85 exam dumps to help you get ready for the real HP HPE6-A85 exam.

High HPE6-A85 Quality: https://www.validtorrent.com/HPE6-A85-valid-exam-torrent.html